Difference between revisions of "Template:Powering up the board"
Jump to navigation
Jump to search
(Created the template) |
(No difference)
|
Latest revision as of 14:46, 19 October 2020
Important
If you are using pico-SAM9G45 without an LCD attached the backlight booster will get very hot. To disable it please read backlight control note.
In order to see if the board starts, power it up and you should see the PWR led (green) light up.
The PWR led will light up even if you haven't installed a bootable microSD or a SD card on the microSD slot from the back of the board.
For more information on debugging without booting an OS, see Connecting with Sam-BA page.