Template:Powering up the board

From Low cost, low power, android ARM system board by Mini-Box.com - pico WiKi
Jump to navigation Jump to search

If you are using pico-SAM9G45 without an LCD attached the backlight booster will get very hot. To disable it please read backlight control note.

In order to see if the board starts, power it up and you should see the PWR led (green) light up.
The PWR led will light up even if you haven't installed a bootable microSD or a SD card on the microSD slot from the back of the board.

For more information on debugging without booting an OS, see Connecting with Sam-BA page.