J7 connector

From Low cost, low power, android ARM system board by Mini-Box.com - pico WiKi
Revision as of 09:01, 10 November 2011 by Admin (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

J7 connector provides SPI port 0, I2C port 0, serial 0 (DBGU) and 1 (UART1) and GPIO

Image 1: Zoom in right side (top view) of pico-SAM9G45 development board showing J7 connector with PIN1 marked up.

J7 connector

NOTE: Connectors have a 2.0 mm pitch

For information on SPI see: Working with SPI interface
For information on I2C see: Working with I2C interface
For information on GPIOs see: Working with GPIOs

Personal tools