Compiling Angstrom for pico-SAM9G45

From Low cost, low power, android ARM system board by Mini-Box.com - pico WiKi
Revision as of 08:12, 25 April 2012 by Npavel (Talk | contribs)
Jump to: navigation, search

Contents

Obtain the proper angstrom distribution

by running the following command:

 git clone git://gitorious.org/picopc-tools/picopc-angstrom-setup.git
 cd picopc-angstrom-setup

Configure the picosam9 machine

by running the following commands:

 MACHINE=picosam9 ./oebb.sh config picosam9
 MACHINE=picosam9 ./oebb.sh update

The script will also download and install picosam9 recipes for angstrom from here: https://gitorious.org/picopc-tools/picopc-angstrom

Start building

if you want to build only the kernel:

 MACHINE=picosam9 ./oebb.sh bitbake virtual/kernel

or if you want a base image:

 MACHINE=picosam9 ./oebb.sh bitbake base-image

To get the same build as the binary ones provided by mini-box.com you can use the recipes from the archive:

 MACHINE=picosam9 ./oebb.sh bitbake picosam9-gpe-image
 MACHINE=picosam9 ./oebb.sh bitbake picosam9-console-image

Notes:

  cd sources/openembedded
  git checkout tested_2011-01-13 -b tested_2011-01-13
  cd sources/bitbake
  git checkout 1.12
Personal tools
Namespaces
Variants
Actions
Toolbox